Menu
Take the sizing quiz
Dog Doors Depot
Sizing Quiz(866) 667-8126
Home / Collections / French Door Dog Doors

French Door Dog Doors

A pet door can often be installed in a compatible French door panel when the rails, stiles, glass and internal construction leave enough clear mounting area.

Filter your search
By Category:
Popular For:
Sort By

Showing 2 products, sorted by featured.

Buyer's guide

Choosing french door dog doors

Start with the pet, the opening and the conditions around it. Then compare the details that make the installation comfortable, durable and easy to service.

Door Model
Start here

The right french door dog doors starts with the project

Choose the active or inactive leaf based on swing, latching hardware and traffic flow.

  • Confirm the cutout will not interfere with the lockset, flush bolts or glass perimeter.
  • Because French doors vary widely, inspect the door construction before ordering and use a professional installer when the internal structure is uncertain.
Pass-Through Door Model
Fit and clearance

Fit the pet, then fit the frame

After choosing the flap from pet measurements, trace the complete frame footprint on the proposed leaf and check both faces of the door.

  • Separate animal fit from construction fit.
  • First choose a clear opening that lets the pet pass with modest clearance at the shoulders and sides.
  • Dog Doors Depot carries 11 standard flap sizes from Small Medium through Giant, including tall intermediate sizes that separate height from width.
Door Model
Installation planning

Plan the installation before ordering

French doors vary widely, including full-lite glass, divided lites, raised panels and reinforced lock edges.

  • An installer should verify uncertain construction before the order is finalized.
  • Read the model-specific manual before layout, not after the opening is cut.
  • Verify tools, fasteners, sealants, tunnel pieces, frame orientation and any professional trade requirements.
Door Model
Ownership and service

Weather, service and long-term use

Preserve door swing, latching, astragal contact and perimeter seals.

  • The pet door should not interfere with how the paired leaves close or secure.
  • Surface choice changes maintenance.
  • Exterior walls and doors need periodic perimeter and water-management inspection.
Door Model
Common pitfalls

Mistakes to avoid

Do not assume the inactive leaf is empty inside or that a decorative lower panel has enough flat area for the full frame.

  • A strong preflight is deliberately repetitive: measure again, check the dimensional label, compare both faces of the opening and read the exact manual.
  • Confirm that the host door, wall, screen, glass or kennel panel remains safe and functional after the cutout.
Door Model
Order readiness

From a shortlist to an order-ready configuration

Move from shortlist to order only after four checks agree.

  • The pet fits the clear opening; the building can accept the rough opening and full frame; the selected model matches the surface and thickness; and the flap, finish, cover and accessory choices match the intended use.
  • Read the finished configuration back as a complete sentence before approving it: model family, named size or custom dimensions, measurement basis, frame finish, flap count, installation surface, finished thickness and mounting location.
  • Then compare that sentence with the cart, worksheet and installer scope.
Designed around real homes

What a good dog-door decision includes

Photograph both sides of the location
Identify material and complete thickness
Map the rough opening and full frame
Check structure, utilities and hardware
Review the model installation manual
Installed pet door in a glass patio door
Decision summary

Compare the project from four angles

Primary decision

Identify a compatible active or inactive leaf with enough flat lower-panel space and no conflict with glass, rails, stiles, flush bolts, locksets or weather seals.

Fit check

After choosing the flap from pet measurements, trace the complete frame footprint on the proposed leaf and check both faces of the door.

Installation check

French doors vary widely, including full-lite glass, divided lites, raised panels and reinforced lock edges. An installer should verify uncertain construction before the order is finalized.

Ownership check

Preserve door swing, latching, astragal contact and perimeter seals. The pet door should not interfere with how the paired leaves close or secure.

Ready when the details agree

Find the door that fits the pet and the project.

Use the sizing quiz for a guided recommendation, or return to the products above with your measurements in hand.

Take the sizing quizShop this collection
Continue comparing

Related dog-door collections and guides

Patio-door choicesDoor-mounted modelsIn-glass alternativesInteractive sizing guideCustom size calculator
Questions, answered

Common questions about french door dog doors

What should I compare first when shopping french door dog doors?+

Identify a compatible active or inactive leaf with enough flat lower-panel space and no conflict with glass, rails, stiles, flush bolts, locksets or weather seals. The defining question for French Door Dog Doors is what the frame will pass through and what must remain functional around it. A flap opening is only the pet passage; the installed frame occupies more room and may interact with structural members, door rails, glass edges, screen frames, locks, trim and weather seals. Compare the product’s rough opening and outer dimensions with a drawing or taped outline on both faces of the proposed location. If the outline crosses hardware, uneven panels or required edge clearances, change the location or model before ordering.

How do I know whether french door dog doors will fit?+

After choosing the flap from pet measurements, trace the complete frame footprint on the proposed leaf and check both faces of the door. Check the clear flap opening for the pet, the rough opening for the cut and the tip-to-tip frame for the available mounting area.

What should an installer verify for french door dog doors?+

French doors vary widely, including full-lite glass, divided lites, raised panels and reinforced lock edges. An installer should verify uncertain construction before the order is finalized. The exact product instructions and selected SKU should be available before any permanent opening is made.

How should I maintain french door dog doors?+

Preserve door swing, latching, astragal contact and perimeter seals. The pet door should not interfere with how the paired leaves close or secure. Record the model and size, keep moving surfaces clean and replace only verified compatible service parts.

Can I use the sizing quiz before ordering french door dog doors?+

Yes. The sizing quiz is a useful starting point because it asks for the pet, opening type, size and weather conditions before pointing you toward a model family.

What if a standard size does not work for french door dog doors?+

Use the custom-size workflow after checking the standard size chart. Enter whether the measurement is based on flap opening, rough opening or outer frame so the order and installer are working from the same dimensions.

How do I choose the right pet door size?+

Measure from the floor to the top of your pet’s shoulders and measure the widest point of the body. The flap should generally sit about 1–2 inches above the shoulders, with a comfortable step-over height. Use the actual pet measurements rather than breed averages.

Are these pet doors made to order?+

Yes. Frame color, flap count, size and installation type are selected for your opening. Review the measurements and selected configuration carefully before submitting an order.

Can I replace the flaps later?+

Yes. Replacement flaps, flap kits, magnets, weather stripping, locks and covers are available. Match the replacement part to the original pet-door size and model.